FEATURES
2 x 5A Leading Edge Dimming
Suitable for use with incandescent lamps and most types of dimmable electronic transformers, Total box Load is 10 A
Single Phase Input 85-260 VAC
1 phase at 10A
Frequency 50/60 HZ
Suitable for 220 / 110 VAC Lighting
Surge Protection
Each module has capacitors and voltage-sensitive resistors for surge protection power line
Over Heat Protection
Big Heat sink with Built in temp sensor when temp exceed 81±2 C, module will limit output to 80% of original
Green Product
Bus enabled , Powered by 15-32 VDC
Consumption 25mA/24VDC
Overload Protection
Each channel is protected by a
replaceable 6.3 A time delay fuse.
Data line Short Protection
Protection for Bus Power Polarity Change, or connect to data terminal
Emergency bypass switch
2 Momentary Button to switch each channel ON/OFF
LED Indicator
To Indicate the Channel statues ON or OFF
Life statues LED
LED Indicator, blinking to indicate that Module powered and bus connected
Simple Installation
Din Rail Mount, Standard 35mm guide rail mounting Elegant Plastic Labeling Tag for Module Name
Broadcast Address Button
To broadcast the Module Address to the Programming software
Areas and Scenes
2 independent areas, each with up to 12 scenes, with Fade time of 0 seconds to 60 minutes
Sequence Feature
Up to 6 Sequence of 12 steps each 1.0 to 60 minutes With Optional steps times, and Running modes.
Channel Maximum Level
Low threshold, high threshold and maximum threshold available to suite different loads of each channel.
Restore Function
Device restored to previous scene or Specific scene after Power Restore to the Module
Click here for more details.
No comments:
Post a Comment